Tepe, Bulent and Gunay, Banihan (2008) Evaluation of pre-treatment processes for HRS (hot rolled steel) in powder coating. PROGRESS IN ORGANIC COATINGS, 62 (2). pp. 134-144. [Journal article]
- Published Version
Indefinitely restricted to Repository staff only.
Hot rolled steel (HRS) is used extensively in the automotive, agricultural and appliance industries. The corrosive response of HRS was investigated after it had been exposed to various surface treatments, prior to powder coating. The behaviour of three conversion coatings: zinc phosphate (ZnP), iron phosphate (FeP) and zirconium (Zr)-based nano-scaled, on HRS was studied. HRS is naturally covered with iron oxide scale and this was removed from the surface by mechanical and chemical processes, prior to the application of surface treatment and organic coatings. The following tests on differently treated panels were conducted to evaluate corrosion performance: adhesion tests such as, crosshatch, pull-off, and conical bending, SEM, XPS, salt spray and electro-chemical impedance studies were also performed. Good correlations were recorded showing that zinc phosphate conversion coating gave the best performance, and zirconium-based nano-structured conversion coating, was superior to that of iron phosphate conversion coatings on HRS. (C) 2007 Elsevier B.V. All rights reserved.
|Item Type:||Journal article|
|Faculties and Schools:||Faculty of Art, Design and the Built Environment|
Faculty of Art, Design and the Built Environment > School of the Built Environment
|Research Institutes and Groups:||Built Environment Research Institute|
Built Environment Research Institute > Centre for Research on Property and Planning (RPP)
|Deposited By:||Dr Banihan Gunay|
|Deposited On:||16 Dec 2009 14:40|
|Last Modified:||09 Dec 2015 10:01|
Repository Staff Only: item control page