Ulster University Logo

Flame extinction properties of solids obtained from limiting oxygen index tests

Suzanne, M, Delichatsios, M and Zhang, Jianping (2014) Flame extinction properties of solids obtained from limiting oxygen index tests. Combustion and Flame, 161 (1). pp. 288-294. [Journal article]

Full text not available from this repository.

URL: http://www.sciencedirect.com/science/article/pii/S0010218013003301

DOI: 10.1016/j.combustflame.2013.08.026

Abstract

Extinction theory is used in this work to determine from the limiting oxygen index test (LOI), widely used in industry, flame extinction properties such as the critical mass flux at extinction and its dependence on oxygen concentration. A method for characterizing the chemistry related to extinction, namely activation energy and pre-exponential factor, for an assumed one-step global Arrhenius reaction rate is also presented. In previous work, we showed how the LOI is related to key flammability properties of a material as measured by thermogravimetric analysis, differential scanning calorimetry, and cone calorimetry. In this work, even though the chemical kinetics for practical materials are unknown, we use results from a slightly modified LOI apparatus to derive the material extinction properties, including chemistry effects, by assuming a one-step global Arrhenius reaction rate for extinction. The extinction of flames on a solid surface depends on the flow field through both the heat transferred to the solid and the straining of the flame near stoichiometric conditions. The heat transferred to the solid is determined using a convective heat transfer coefficient, because flame radiation near the surface is small at extinction, and the strain rate affecting the flame reactions is expressed by a characteristic flow time. These flow parameters depend on the local flow conditions. For a counterflow situation, these parameters have been identified in our previous work, whereas for other flow situations, they can be determined from the specific flow field. The ratio of the flow time to the chemical time is used to determine a modified Damköhler number, together with the activation and flame temperatures. The heat transfer coefficient is used to determine the dimensionless mass flux at extinction, which is a function of the Damköhler number.

Item Type:Journal article
Keywords:extinction; LOI
Faculties and Schools:Faculty of Art, Design and the Built Environment
Faculty of Art, Design and the Built Environment > School of the Built Environment
Research Institutes and Groups:Built Environment Research Institute
Built Environment Research Institute > Fire Safety and Engineering Research and Technology Centre (FireSERT)
ID Code:36929
Deposited By: Dr Jianping Zhang
Deposited On:13 Feb 2017 11:46
Last Modified:13 Feb 2017 11:46

Repository Staff Only: item control page